ARES 40 W220 - Load up to 120 Kg (265 Lb) Like every product from the LHD Group: this Load Handling Device has been designed by the LHD Engineering team and assembled by the LHD Manufacturing Team. ARES 40 W220 has been designed and buildt to handle loads with limited weight but unusual bulky or heaviaer then 120kg (265 Lb). The motion systrem is a belt/gears group, thus it can reach remarkable top speed and acceleration. The wider top plate...

ARES 70 - Load up to 1350 Kg (2980 Lb) Like every LHD S.p.A. product, this Load Handling Device has been designed by the LHD S.p.A. Engineering team and assembled by LHD Manufacturing. ARES 70 has a similar design to the ARES 65, but with a stronger structure that fits for handling of non-conventional loads in automated warehouses. It's geometric shape allows attaining the highest moment of inertia with no excessive size. The type of environment and the modes in...

ARES 85 SX -Load up to 1750 Kg(3860 Lb) It's a telescopic fork with a similar design to the ARES 65,but with stronger structure.The ARES 85 SX is produced in various types of stainless steel,depending on the operating sector....

ARES 140 SLV - Load up to 1.600 Kg (3.530 Lb) It’s a peculiar type of telescopic fork, just 100x140 mm, since its high moment of inertia totally lies in its thickness rather than in its width. It’s specifically designed to pass through particularly narrow openings, although it can handle notably heavy loads. This equipment is made of special materials and innovative solutions have been employed for its development. It’s mainly used in the paper industry to handle big paper...

ATHENA 130 W250 - Load up to 4000 Kg (8820 Lb) This ATHENA for special applications allows handling heavy loads with long strokes and small bending. Not suitable for high speeds and accelerations, it works at its best where thoughness, repeatability and fatigue stress are required. As for the transmission, it’s available both with racks and pinions and with chains....

ATHENA 220SLV - Load up to 4000Kg (8820 Lb) Bigger sister of the ARES 140 SLV, in this type of telescopic fork the high moment of inertia totally lies in its arm thickness rather than in its width. It’s designed to pass through particularly narrow openings, although it can handle notably heavy loads, such as big metal or paper coils, with low bending and long life cycle....

MEDUSA - Load up to 100 Kg (220 Lb) The MEDUSA is essentially a double-depth telescopic fork (usually in a monofork arrangement) with a further moving plate that can shift along the upper slide when the forks are in centre position, allowing to change the position of a load unit that sits on the upper slide according to customer needs, with no need of side belts....