ATHENA 110 - Load up to 2500 Kg (5515 Lb) Like every product from the LHD Group: this Load Handling Device has been designed by the LHD Engineering team and assembled by the LHD Manufacturing Team. Intermediate fork of the ATHENA series, it’s a very versatile and safe piece of equipment. It can rely on a solid structure with a remarkably small bending. Among its many applications, there is the possibility to be installed upside down, for special purposes. Thanks...
ATHENA 130 W250 - Load up to 4000 Kg (8820 Lb) This ATHENA for special applications allows handling heavy loads with long strokes and small bending. Not suitable for high speeds and accelerations, it works at its best where thoughness, repeatability and fatigue stress are required. As for the transmission, it’s available both with racks and pinions and with chains....
Load up to 3.000 Kg (6600 Lb) Like every product from the LHD Group: this Load Handling Device has been designed by the LHD Engineering team and assembled by the LHD Manufacturing Team. It’s a very strong, though and performing telescopic fork. It’s expressly designed by LHD to fill a gap in the choice of telescopic forks in order to fulfill an increasing requirement by the current handling industry. Thanks to its though structure, the ATHENA 160 has a very...
ATHENA 183 - Load up to 5000 Kg (11025 Lb) Like every product from the LHD Group: this Load Handling Device has been designed by the LHD Engineering team and assembled by the LHD Manufacturing Team. This model of the ATHENA series is particularly suitable for handling heavy loads with long strokes and low bending. Due to its considerable weight, it’s designed for on-site maintenance: all components prone to wear and tear can be replaced without removing the fork from...
Load up to 4000 Kg (8820 Lb) Like every product from the LHD Group: this Load Handling Device has been designed by the LHD Engineering team and assembled by the LHD Manufacturing Team. It’s a peculiar type of telescopic fork since its high moment of inertia totally lies in its thickness rather than in its width. It’s specifically designed to pass through particularly narrow openings, although it can handle notably heavy loads. This equipment is made of special materials and...
ATHENA 220SLV - Load up to 4000Kg (8820 Lb) Bigger sister of the ARES 140 SLV, in this type of telescopic fork the high moment of inertia totally lies in its arm thickness rather than in its width. It’s designed to pass through particularly narrow openings, although it can handle notably heavy loads, such as big metal or paper coils, with low bending and long life cycle....
ATHENA 270 - Load up to 20000 Kg (44100 Lb) It’s a very strong, though and performing telescopic fork. Thanks to its though structure, the ATHENA 270 has a very small bending, even when carrying heavy loads. It’s particularly suitable for the handling of car bodies and chassis within the automotive sector....
PEGASUS - Load up to 4000 Kg (8820 Lb) Push and pull single telescopic fork able to handle till 4000 Kg. When vertical space does not allow to lift the load then it is possible push and pull...