ARES 65K - Load up to 1000 Kg The strong points of this mono-fork are its high moment of inertia and its relatively small size. With only 65 mm thickness, it can pick up a 1000 Kg load in single depth alone, despite the small bending and the high work pace it can reach. It`s very useful in all those situations where there`s no room for a typical pair of forks and where the load to handle is else than...

ARES 85 SX -Load up to 1750 Kg(3860 Lb) It's a telescopic fork with a similar design to the ARES 65,but with stronger structure.The ARES 85 SX is produced in various types of stainless steel,depending on the operating sector....

ARES 140 SLV - Load up to 1.600 Kg (3.530 Lb) It’s a peculiar type of telescopic fork, just 100x140 mm, since its high moment of inertia totally lies in its thickness rather than in its width. It’s specifically designed to pass through particularly narrow openings, although it can handle notably heavy loads. This equipment is made of special materials and innovative solutions have been employed for its development. It’s mainly used in the paper industry to handle big paper...

MEDUSA - Load up to 100 Kg (220 Lb) The MEDUSA is essentially a double-depth telescopic fork (usually in a monofork arrangement) with a further moving plate that can shift along the upper slide when the forks are in centre position, allowing to change the position of a load unit that sits on the upper slide according to customer needs, with no need of side belts....

ZEUS 75 - Load up to 90 kg (198 Lb) Being the double depth version of the ARES 40, the ZEUS 75 is particularly fit for those applications with a small required space of the slides. The fixed body consists of parts made of a steel/aluminium compound; hence, the total weight of the device is limited. The ZEUS 75 is recommended as single fork with a larger plate installed on top, for handling small carton or plastic boxes within the...

CYCLOPS - Load up to 2000 Kg (4410 Lb) Like every product from the LHD Group: this Load Handling Device has been designed by the LHD Engineering team and assembled by the LHD Manufacturing Team. The strong points of this monofork are its high moment of inertia and its relatively small size. With only 140 mm thickness, it can pick up a 2000 Kg load in double depth alone, despite the small bending and the high work pace it can...