ARES 65K - Load up to 1000 Kg The strong points of this mono-fork are its high moment of inertia and its relatively small size. With only 65 mm thickness, it can pick up a 1000 Kg load in single depth alone, despite the small bending and the high work pace it can reach. It`s very useful in all those situations where there`s no room for a typical pair of forks and where the load to handle is else than...

ARES 85K - Load up to 1750 Kg (3860 Lb) The Ares 85 K relies upon the same designs as the 65 K, but with a middle slide thickness increased by 20 mm, wich allows the handling of heavier loads (up to 1750 Kg)...

ATHENA 130 - Load up to 2500 Kg (5515 Lb) Like every product from the LHD Group: this Load Handling Device has been designed by the LHD Engineering team and assembled by the LHD Manufacturing Team. Being fit for special applications, the ATHENA 130 allows handling heavy loads with long strokes and small bending. ATHENA 130 has the possibility to be installed upside down, for special purposes. Not suitable for high operating speeds and accelerations, it works at its best...

ATHENA 130 W250 - Load up to 4000 Kg (8820 Lb) This ATHENA for special applications allows handling heavy loads with long strokes and small bending. Not suitable for high speeds and accelerations, it works at its best where thoughness, repeatability and fatigue stress are required. As for the transmission, it’s available both with racks and pinions and with chains....

Load up to 3.000 Kg (6600 Lb) Like every product from the LHD Group: this Load Handling Device has been designed by the LHD Engineering team and assembled by the LHD Manufacturing Team. It’s a very strong, though and performing telescopic fork. It’s expressly designed by LHD to fill a gap in the choice of telescopic forks in order to fulfill an increasing requirement by the current handling industry. Thanks to its though structure, the ATHENA 160 has a very...

ATHENA 183 - Load up to 5000 Kg (11025 Lb) Like every product from the LHD Group: this Load Handling Device has been designed by the LHD Engineering team and assembled by the LHD Manufacturing Team. This model of the ATHENA series is particularly suitable for handling heavy loads with long strokes and low bending. Due to its considerable weight, it’s designed for on-site maintenance: all components prone to wear and tear can be replaced without removing the fork from...